首页 > 产品信息 > 图像处理光源 > 灯箱 > PFB3(A)系列 > PFB3-20SW-AJT-SH1(A)

PFB3-20SW-AJT-SH1(A)

LED light source PFB3-20SW-AJT-SH1(A). Analog type external control.
It measures 70 x 150 x 100 mm (width x depth x height). (Not including parts such as connectors, knobs, and feet.)

产品详细信息

LED发光颜色 White
相关色温 5,700 K typ.
外观尺寸 W 70 mm x D 150 mm x H 100 mm
(not including connectors, knobs, legs, and other projections)
Please refer to the "Dimensions" tab for light guide adapter dimensions chart.
通道数 1 channel
发光方式 常时发光
驱动方式 Constant-current system
调光方式 可变电流控制
调光 Manual
Continuous control using the intensity control knob
Remote
Analog: Continuous intensity control with a 0 to 5 VDC input voltage
External variable resistor: Continuous intensity control with an external variable resistor
Note: A faint light turns on when the intensity is set to the minimum.

Using the Remote/Manual switch on the front panel
Switched with external control connector (analog input voltage or external
variable resistor).
输入电压 24 VDC (rated)
21.6 to 26.4 VDC (range)
消耗功率 18 W typ.
绝缘耐压・绝缘电阻(输入-FG) Insulation resistance: 500 VDC, 1M Ω min.
Withstanding voltage: 250 VAC for one minute, cutoff current: 10 mA
外壳材质 Aluminum alloy
错误检测显示 An error indicator lamp on the front panel flashes (0.5 sec) and output stops
输入端口 DC jack for power supply, Terminal block for power supply, External Control connector (15-pin D-sub)
适合规格 CE, UKCA, RoHS, IEC 62471（Low risk）
使用温湿度 Temperature: 0 to 40℃, Humidity: 25 to 85%RH
(No condensation)
保存温湿度 Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation)
冷却方式 Forced air cooling, Intake vents: sides, Exhaust vents: rear
重量 1,200 g max.
附属品 使用说明书
注意事项 Be sure to confirm the specifications of the light guide before use.

外形尺寸图(mm)

* Click to enlarge image.

线缆

  • EXCB2-B3

选件

  • ADP2460-PFB-JTLV6

资料下载

综合目录(摘录) PDF图纸 DXF图纸 使用说明书 关于保证和环境管制 3D-CAD

产品类别